Lab Setup

In order to start working with your Zephyr RTOS and your board, you first need to set up the toolchain you are going to use throughout the labs and configure your IDE to help you develop and debug. We recommend to set it up before the first lab. Bear in mind that you need to download a couple GBs of data, and you will use around 6 GBs of space inside your computer.

The following pages will guide you through the setup

• Toolchain Setup - covers the toolchain setup and other packages needed to do the assignments
• Editor Setup - explains how to set up your IDE for a simpler build, debug and flashing process
• Development kit - an overview of what you the hardware picked up in Lab 1
• Logic Analyser Setup - explains how to install the required software and packages for using the provided logic analysers